Welcome

E-2D: Unable to connect via web interface / no login screen

Issue: Unable to connect via web interface / no login screen

Cause: Wrong IP address.

Solution: Use NTI Device Discovery Tool to locate configured IP address.

• Browse the installation manual CD and click on the file discover.html. This will open your browser and display the Device Discovery Tool page.

• Accept the Certificate to allow the loaded applet access to your network.

• Press the button “Detect NTI Devices” to start the discovery process.

• After a short time, the tool will display all NTI devices on your network, along with their network settings.

• Locate the IP address of the ENVIROMUX and type it into the address bar of the web browser to access the web interface.

OR

Cause: HTTP not enabled.

Solution: Enable HTTP.

• Type in the ENVIROMUX IP address into the address bar. It should automatically redirect to an HTTPS (secure) connection.

• Accept the NTI certificate if it pops up.

• Select “Network Configuration” and access “Server Settings.”

• Put a checkmark in the box “Enable HTTP Access.”

OR

Cause: HTTP moved from default (port 80).

Solution: Identify port number assigned.

• Access the ENVIROMUX through a terminal program.

• Under the “Network Configuration” menu, select the “Miscellaneous Service Settings.”

• The port number assigned is under “HTTP Port.”

• After identifying the correct port number, login to the web interface and select “Network Configuration.”

• Under “Server Settings,” input the correct port number.

• The web interface should work now.

OR

Cause: IP conflict (2 units on the same IP address)

Solution: Change IP address to resolve conflict

• Log into unit via USB console.

• Under “Network Settings,” change the IP address.