Jive Knowledge Base : entry.title


	Welcome

Knowledge Base Home » ... » E-5D » FAQ » Document 1963

This document was published at: http://information.networktechinc.com/jive/entry.jspa?externalID=1963&categoryID=131

E-5D: How to cascade ENVIROMUX units via Internet?
Author: Administrator, Created on: Dec 5, 2013 4:18 PM

E-5D: How to cascade ENVIROMUX units via Internet?

To Ethernet cascade the ENVIROMUX unit over the Internet:

Ensure the master and slave units have access to the Internet.

The network configuration is set for internet access.

Set up an ENVIROMUX unit as a slave.

Under the web interface, go to Administration > Cascading, select Ethernet Slave then press save.
If the slave unit is behind a Firewall/Router, ensure port 5919 is open.

Set up slave connection to the master ENVIROMUX unit.

Under the master unit, go to Administration > Cascading > Slaves. Select Ethernet slave, then enter in the IP address of the slave ENVIROMUX unit and press save.