Network Technologies Inc, Innovators in KVM SolutionsWelcome Return to NTI homepage
KVM
SWITCHES
CONSOLE
SWITCHES
KVM
SPLITTER
VIDEO
SWITCHES
VIDEO MATRIX
SWITCHES
VIDEO
SPLITTER
EXTENDERS
via CAT5
KVM
DRAWERS
MONITORS &
ACCESSORIES
SERVER
ENVIRONMENT
VIDEO
CONVERTERS
CABLES &
ADAPTERS



This document was published at: http://information.networktechinc.com/jive/entry.jspa?externalID=1761&categoryID=149


VOPEX-C5HDA-x: No video on monitor/display
Author: Administrator, Created on: Jan 18, 2013 2:20 PM

VOPEX-C5HDA-x: No video on monitor/display

Issue: No video on monitor/display.

Cause: One or more video cables is loose or disconnected.

Solution: Check all video cable connections.

OR

Cause: No power to the VOPEX or the XTENDEX receiver.

Solution: Make sure power LEDs are illuminates for both local and remote units. If not, Ensure that each outlet is live and that the AC adapters are plugged-in (one for each remote unit and one for the VOPEX). Make sure the DC plugs are fully connected and power switches are in “ON” position.

OR

Cause: Video cable was not attached when CPU was booted.

Solution: With all the cables properly connected, reboot the CPU.

OR

Cause: CAT5 cable is not connected.

Solution: Check cable connections. Ensure they are properly and completely snapped-in, then reboot the CPU.