Jive Knowledge Base : entry.title


	Welcome

Knowledge Base Home » VEEMUX - Video Matrix Switches » FAQ » Document 123

This document was published at: http://information.networktechinc.com/jive/entry.jspa?externalID=123&categoryID=79

Can I have video from several sources cycle sequentially on a display at specified intervals of time?
Author: Administrator, Created on: Aug 15, 2007 3:03 PM

Can I have video from several sources cycle sequentially on a display at specified intervals of time using the VEEMUX Video Matrix Switch?

Yes, use the Scan Mode to have an output port automatically switch from one input port to the next consecutive input port after a specified period of time (referred to as the dwell time).

Scan Mode can be accessed via the front panel buttons or the Web Interface.

To access Scan Mode from the front panel, push the ?Menu? button twice and select ?Set Scan Mode?. Select the port and set the dwell time you prefer - anywhere from 0 seconds to 255 seconds.

OR
From the left bar menu of the Web Interface, select ?Administration? and then the ?Outputs Scanning Sequences?. Set the dwell time you prefer for each output - anywhere from 0 seconds to 32,000 seconds