Network Technologies Inc, Innovators in KVM SolutionsWelcome Return to NTI homepage
KVM
SWITCHES
CONSOLE
SWITCHES
KVM
SPLITTER
VIDEO
SWITCHES
VIDEO MATRIX
SWITCHES
VIDEO
SPLITTER
EXTENDERS
via CAT5
KVM
DRAWERS
MONITORS &
ACCESSORIES
SERVER
ENVIRONMENT
VIDEO
CONVERTERS
CABLES &
ADAPTERS



This document was published at: http://information.networktechinc.com/jive/entry.jspa?externalID=1869&categoryID=90


E-16D: How to Setup SNMP Traps
Author: Administrator, Created on: Mar 29, 2013 11:46 AM

E-16D: How to Setup SNMP Traps

Access the web interface and go to Administration > Network.

snmp1.jpg

Under the sensor configuration for each sensor, enter a Group number that the sensor should belong to. Users can receive alert messages from some, all, or no sensor groups, based on the configuration under User Settings.

snmp2.jpg

Place a checkmark in “Enable SNMP Traps” checkbox under the sensor configuration for each sensor that should send traps when there is an alert. If you want them sent for Critical Alerts and Non-Critical Alerts, there is a checkbox for each level.

snmp3.jpg

Click on Administration > Users, and choose a user or yourself to edit.

snmp4.jpg

Note: the username in the ENVIROMUX user configuration must match the username in SNMP browser configuration.

snmp6.jpg