Jive Knowledge Base : E-MINI: SNMP get (snmpget) command not functioning properly

Knowledge Base Home » ... » E-MINI » Troubleshooting » Document 83

[83] E-MINI: SNMP get (snmpget) command not functioning properly

« Back to Category

Author:	Administrator, Created on: Oct 2, 2006 3:41 PM
Language:	English

Printer Friendly

Issue: SNMP get command not functioning properly Cause: Some implementations of the SNMP get command (snmpget) require an additional .0 at the end of the command as a terminator. Solution:

Add an additional .0 to the end of the of the command line as shown in the example below: snmpget -m enviromux-mini.mib -Pu -c public v 1 192.168.1.21 1.3.6.1.4.1.3699.1.1.3.1.2.1.0
The MIB is specified with the ?m switch and the full path to the file should be specified. The SNMP MIB file (enviromux-mini.mib), for use with an SNMP MIB browser, can be found on the manual CD.

Comments

No comments.

Welcome, Guest

Guest Settings


	Welcome