Jive Knowledge Base : How do I set up the SERIMUX-SCRP-x Console Switch to run the HP Lights-Out Remote Management?

Knowledge Base Home » SERIMUX-Console Switches » FAQ » Document 141

[141] How do I set up the SERIMUX-SCRP-x Console Switch to run the HP Lights-Out Remote Management?

« Back to Category

Author:	Administrator, Created on: May 5, 2008 4:06 PM
Language:	English

Printer Friendly

How do I set up the SERIMUX-SCRP-x Console Switch to run the HP Lights-Out Remote Management?

To set up the SERIMUX-SCRP-x Console Switch for access to the HP Lights-Out Remote Management:

Access the SERIMUX-SCRP-x Web Interface
Select "Serial Port " and then "Configuration"
Select the port to configure
Select "FreeKVM Configuration"
From the "Connection" pull down menu select "Enable"
In the IP address window enter the IP address of the Baseboard Management Controller (BMC)
From the "Client Program" pull down menu select "Web Redirection"
Verify the Program path is http://$IP$
For a secure connection, edit the program path to https://$IP$
Select "Add"
Select "Save & Apply " at the bottom of the page

Comments

No comments.

Welcome, Guest

Guest Settings


	Welcome