ST-C5USBV(A)-300(M): Video picture is not sharp or is smeared.

Issue: Video picture is not sharp or is smeared.

Cause: CAT5 cable is too long.

Solution: Verify length is within specified limits of 300 feet.

OR

Cause: Video quality is not set properly.

Solution: Fine adjustment (ST-C5USBVA-300) and Manual Video Quality Adjustment (ST-C5USBV-300) can be done by entering Command Mode. To enter Command Mode, simultaneously press the left and right <Shift> keys on the keyboard connected to the Remote Unit. The keyboard LEDs will illuminate.

• Press the ▲ (up arrow) key if the image is not crisp and clear enough.

• Press the ▼(down arrow) key if the image has been over-corrected (such that horizontal lines appear to trail or shadow at the edge of an open window)