|
How do I calculate the BTU Output (Head Load) of NTI Products?
[1606]
Last Modified:
Nov 6, 2012 9:53 AM
How do I calculate the BTU Output (Head Load) of NTI Products? To determine the BTU output: Determine the voltage and amp rating of the power supply of the product. This information can usually be obtained from the product documentation or
|
|
|
What is the difference between SNMP and Syslog?
[1605]
Last Modified:
Nov 6, 2012 9:52 AM
What is the difference between SNMP and Syslog? SNMP stands for Simple Network Management Protocol and allows for remote monitoring and configuration of SNMP-capable devices on a network, while Syslog is a different protocol that can be used
|
|
|
What is SNMP?
[1604]
Last Modified:
Nov 6, 2012 9:51 AM
What is SNMP? SNMP stands for Simple Network Management Protocol. SNMP allows SNMP-capable devices on a network to be monitored and configured remotely. SNMP also allows these devices to report events through the use of SNMP traps. For more
|
|
|
E-16D: Why are my combination temperature/humidity sensors reading different humidity values?
[1603]
Last Modified:
Feb 8, 2024 5:48 PM
E-16D: Why are my combination temperature/humidity sensors reading different humidity values? If you have two or more sensors reading different humidity values, the most likely cause is that the temperature values are different for each sensor.
|
|
|
E-16D: Can the ENVIROMUX-16D ping traffic on a 10.x.x.x network and send emails to 153.x.x.x mail relay server?
[1602]
Last Modified:
Jan 31, 2018 11:02 AM
E-16D: Can the ENVIROMUX-16D ping traffic on a 10.x.x.x network and send emails to 153.x.x.x mail relay server? Yes. If the E-16D is on the 10.x.x.x network, it can ping any device on the network and send emails to the 153.x.x.x mail server
|
|
|
E-16D: Can I adapt communications between the ENVIROMUX-16D and a Gigabit network switch?
[1601]
Last Modified:
Jan 31, 2018 11:02 AM
E-16D: Can I adapt communications between the E-16D and a Gigabit network switch? Yes. Most Gigabit switches are 10/100/1000 compatible. When you connect the E-16D to a Gigabit network, the network will configure that port to 100 Mbit speeds.
|
|
|
E-16D: How do I configure the E-16D Web Interface to support HTTPS/Port 443?
[1600]
Last Modified:
Jan 31, 2018 11:03 AM
E-16D: How do I configure the E-16D Web Interface to support HTTPS/Port 443? The E-16D is already configured to support HTTPS/Port 443. To connect to the E-16D using HTTPS/Port 443, change the URL of the browser to HTTPS E.g.:
|
|
|
E-STHS: How far can the combination Temperature/Humidity sensor be extended?
[1597]
Last Modified:
Jan 31, 2018 11:03 AM
E-STHS: How far can the combination Temperature/Humidity sensor be extended? The combination Temperature/Humidity sensor can be extended up to 1,000 feet (305 m) via CAT5/5e/6 cable on the E-16D. The cables are sold separately.
|
|
|
E-2W-xx: What are the sensor extension cables used for?
[1596]
Last Modified:
Jan 31, 2018 11:03 AM
E-2W-xx: What are the sensor extension cables used for? Sensor extension cables may be used to extend the reach of dry contact sensors up to 1,000 feet (305 m).
|
|
|
E-SDS or E-SDS-CE: How can I tell if my smoke detection sensor is working?
[1595]
Last Modified:
Jan 31, 2018 11:04 AM
E-SDS or E-SDS-CE: How can I tell if my smoke detection sensor is working? The smoke detector can be tested by using canned smoke or burning a small piece of cotton near the sensor while it is powered on. If the sensor is functioning properly:
|
|
|
E-16D: The sensor graphs do not appear in the web interface after installing the sensors.
[1594]
Last Modified:
Jan 31, 2018 11:04 AM
E-16D: The sensor graphs do not appear in the web interface after installing the sensors. Ensure that you have Java Runtime Environment version 1.5 or newer installed on your computer and are using a compatible browser. Java Runtime
|
|