|
E-5D: How to cascade ENVIROMUX units via Internet?
[1963]
Last Modified:
Feb 7, 2018 11:14 AM
E-5D: How to cascade ENVIROMUX units via Internet? To Ethernet cascade the ENVIROMUX unit over the Internet: Ensure the master and slave units have access to the Internet. The network configuration is set for internet access. Set up an ENVIROMUX
|
|
|
E-5D: Number of IP Devices Supported When Cascading Multiple ENVIROMUX Units?
[1960]
Last Modified:
Feb 7, 2018 11:15 AM
Normal 0 false false false EN-US ZH-CN X-NONE
|
|
|
E-5D: How to Use a Single Modem to Send Out SMS Alerts From Multiple ENVIROMUX units
[1937]
Last Modified:
Feb 13, 2024 11:41 AM
E-5D: How to Use a Single Modem to Send Out SMS Alerts From Multiple ENVIROMUX units Software version 2.4 or newer supports SMS relay capability that allows the user to consolidate alerts from multiple ENVIROMUX units and send them out using a
|
|
|
E-5D: How to Set Up Alerts and Different Contact Settings for Specific Times of the Day/Week
[1927]
Last Modified:
Feb 7, 2018 11:16 AM
E-5D: How to Set Up Alerts and Different Contact Settings for Specific Times of the Day/Week Setting Up Alerts for Specific Times of the Day/Week Have a user only receive alerts during specific times and days of the week. Access the
|
|
|
E-5D: How to Turn Off Public SNMP
[1924]
Last Modified:
Feb 7, 2018 11:16 AM
E-5D: How to Turn Off Public SNMP SNMP public access is part of SNMP v1 and v2c. To disable these versions, take the following actions: On the web interface, go to Administration > Network > SNMP settings. Under “Enable SNMP
|
|
|
E-5D: How to Download Event Logs as Text Files
[1921]
Last Modified:
Feb 13, 2024 11:40 AM
E-5D: How to Download Event Logs as Text Files Web Interface In the navigation, select “Log.” By accessing the “View Event Log” or View Data Log” pages, either the Event or Data Logs can be downloaded by
|
|
|
E-5D: How to Locate OIDs Using a MIB Browser
[1915]
Last Modified:
Feb 7, 2018 11:16 AM
E-5D: How to Locate OIDs Using a MIB Browser Please view the following document: http://www.networktechinc.com/pdf/locating-oids.pdf
|
|
|
E-5D: How to Connect Multiple Smoke Detectors to a Single ENVIROMUX Unit Using the Digital I/O Expander.
[1887]
Last Modified:
Feb 7, 2018 11:17 AM
E-5D: How to Connect Multiple Smoke Detectors to a Single ENVIROMUX Unit Using the Digital I/O Expander. Connect the E-DI16DO16 Digital Input/Open Collector Output Expander to the ENVIROMUX unit's RJ45 sensor port using up to 500 feet
|
|
|
E-5D: Can I use any IP camera with my ENVIROMUX unit?
[1858]
Last Modified:
Feb 7, 2018 11:17 AM
ENVIROMUX-5D: Can I use any IP camera with my ENVIROMUX unit? No, the IP camera used must have motion JPEG capability and a guest user account that does not need a login in order to work with the ENVIROMUX unit.
|
|
|
E-5D: Will the performance of the E-MNG management software be affected if multiple ENVIROMUX units are linked through a WAN?
[1857]
Last Modified:
Feb 7, 2018 11:17 AM
E-5D: Will the performance of the E-MNG management software be affected if multiple ENVIROMUX units are linked through a WAN? No, the performance will not be affected. The E-MNG software is designed to run on both local area networks (LANs) and
|
|
|
E-STHS: How far can the combination Temperature/Humidity sensor be extended?
[1835]
Last Modified:
Feb 7, 2018 11:17 AM
E-STHS: How far can the combination Temperature/Humidity sensor be extended? The combination Temperature/Humidity sensor can be extended up to 1,000 feet (305 m) via CAT5/5e/6 cable on the E-5D. The cables are sold separately.
|
|
|
E-2W-xx: What are the sensor extension cables used for?
[1834]
Last Modified:
Feb 7, 2018 11:17 AM
E-2W-xx: What are the sensor extension cables used for? Sensor extension cables may be used to extend the reach of dry contact sensors up to 1,000 feet (305 m).
|
|
|
E-SDS or E-SDS-CE: How can I tell if my smoke detection sensor is working?
[1833]
Last Modified:
Feb 7, 2018 11:18 AM
E-SDS or E-SDS-CE: How can I tell if my smoke detection sensor is working? The smoke detector can be tested by using canned smoke or burning a small piece of cotton near the sensor while it is powered on. If the sensor is functioning
|
|
|
E-5D: The sensor graphs do not appear in the web interface after installing the sensors.
[1829]
Last Modified:
Feb 7, 2018 11:18 AM
E-5D: The sensor graphs do not appear in the web interface after installing the sensors. Ensure that you have Java Runtime Environment version 1.5 or newer installed on your computer and are using a compatible browser. Java Runtime
|
|
|
How do I calculate the BTU Output (Head Load) of NTI Products?
[1828]
Last Modified:
Mar 4, 2013 2:52 PM
How do I calculate the BTU Output (Head Load) of NTI Products? To determine the BTU output: Determine the voltage and amp rating of the power supply of the product. This information can usually be obtained from the product documentation or
|
|