|
E-2D: Number of IP Devices Supported When Cascading Multiple ENVIROMUX Units?
[1961]
Last Modified:
Feb 7, 2018 10:07 AM
Normal 0 false false false EN-US ZH-CN X-NONE
|
|
|
E-2D: How to Turn Off Public SNMP
[1923]
Last Modified:
Feb 7, 2018 10:07 AM
E-2D: How to Turn Off Public SNMP SNMP public access is part of SNMP v1 and v2c. To disable these versions, take the following actions: On the web interface, go to Administration > Network > SNMP settings. Under “Enable SNMP
|
|
|
E-2D: How to Download Event Logs as Text Files
[1922]
Last Modified:
Feb 13, 2024 11:41 AM
E-2D: How to Download Event Logs as Text Files Web Interface In the navigation, select “Log.” By accessing the “View Event Log” or View Data Log” pages, either the Event or Data Logs can be downloaded by
|
|
|
E-2D: How to Locate OIDs Using a MIB Browser
[1914]
Last Modified:
Feb 7, 2018 10:11 AM
E-2D: How to Locate OIDs Using a MIB Browser Please view the following document: http://www.networktechinc.com/pdf/locating-oids.pdf
|
|
|
E-2D: How to Connect Multiple Smoke Detectors to a Single ENVIROMUX Unit Using the Digital I/O Expander.
[1884]
Last Modified:
Feb 7, 2018 10:11 AM
E-2D: How to Connect Multiple Smoke Detectors to a Single ENVIROMUX Unit Using the Digital I/O Expander. Connect the E-DI16DO16 Digital Input/Open Collector Output Expander to the ENVIROMUX unit's RJ45 sensor port using up to 500 feet of
|
|
|
E-2D: Can I use any IP camera with my ENVIROMUX unit?
[1856]
Last Modified:
Feb 7, 2018 10:11 AM
E-2D: Can I use any IP camera with my ENVIROMUX unit? No, the IP camera used must have motion JPEG capability and a guest user account that does not need a login in order to work with the ENVIROMUX unit.
|
|
|
E-2D: Will the performance of the E-MNG management software be affected if multiple ENVIROMUX units are linked through a WAN?
[1855]
Last Modified:
Feb 7, 2018 10:12 AM
E-2D: Will the performance of the E-MNG management software be affected if multiple ENVIROMUX units are linked through a WAN? No, the performance will not be affected. The E-MNG software is designed to run on both local area networks (LANs) and
|
|
|
E-2D: How to Setup SNMP Traps
[1801]
Last Modified:
Feb 8, 2024 6:01 PM
E-2D: How to Setup SNMP Traps Access the web interface and go to Administration > Network. Enable the proper SNMP Agent type (v1/v2c, v1/v2c/v3, or just v3) depending on what type of SNMP browser you use. v1/v2c: no security required
|
|
|
E-2D: How to Setup Email Alerts
[1800]
Last Modified:
Feb 8, 2024 6:00 PM
E-2D: How to Setup Email Alerts On the web interface, go to Administration > Enterprise Settings and enter a valid email address. Your SMTP server needs to be able to recognize the sender of the message. Next, go to Network Configuration and
|
|
|
E-2D: How to Use Smart Alerts to Inhibit Motion Sensor When Entering a Room Using a Keypad
[1721]
Last Modified:
Feb 8, 2024 5:42 PM
E-2D: How to Use Smart Alerts to Inhibit Motion Sensor When Entering a Room Using a Keypad This entry explains how to create an installation where an installed motion sensor will not trigger an alarm when an operator enters and is within an
|
|
|
What is the difference between the E-LD-LCx-y, E-LDx-y and E-LDSx-y?
[1718]
Last Modified:
Feb 7, 2018 10:14 AM
What is the difference between the E-LD-LCx-y, E-LDx-y and E-LDSx-y? The E-LDx-y and E-LDSx-y are essentially the same unit with the same water detection capabilities. They both detect a liquid depth of >0.1” (2.5 mm) and a minimum
|
|
|
E-STHS: How far can the combination Temperature/Humidity sensor be extended?
[1700]
Last Modified:
Feb 7, 2018 10:15 AM
E-STHS: How far can the combination Temperature/Humidity sensor be extended? The combination Temperature/Humidity sensor can be extended up to 1,000 feet (305 m) via CAT5/5e/6 cable on the E-2D. The cables are sold separately.
|
|
|
E-2W-xx: What are the sensor extension cables used for?
[1699]
Last Modified:
Feb 7, 2018 10:15 AM
E-2W-xx: What are the sensor extension cables used for? Sensor extension cables may be used to extend the reach of dry contact sensors up to 1,000 feet (305 m).
|
|
|
E-SDS or E-SDS-CE: How can I tell if my smoke detection sensor is working?
[1698]
Last Modified:
Feb 7, 2018 10:16 AM
E-SDS or E-SDS-CE: How can I tell if my smoke detection sensor is working? The smoke detector can be tested by using canned smoke or burning a small piece of cotton near the sensor while it is powered on. If the sensor is functioning
|
|
|
E-2D: The sensor graphs do not appear in the web interface after installing the sensors.
[1697]
Last Modified:
Feb 7, 2018 10:16 AM
E-2D: The sensor graphs do not appear in the web interface after installing the sensors. Ensure that you have Java Runtime Environment version 1.5 or newer installed on your computer and are using a compatible browser. Java Runtime
|
|