|
How do I calculate the BTU Output (Head Load) of NTI Products?
[1696]
Last Modified:
Feb 7, 2018 10:16 AM
How do I calculate the BTU Output (Head Load) of NTI Products? To determine the BTU output: Determine the voltage and amp rating of the power supply of the product. This information can usually be obtained from the product documentation
|
|
|
What is the difference between SNMP and Syslog?
[1695]
Last Modified:
Jan 7, 2013 3:18 PM
What is the difference between SNMP and Syslog? SNMP stands for Simple Network Management Protocol and allows for remote monitoring and configuration of SNMP-capable devices on a network, while Syslog is a different protocol that can be used
|
|
|
What is SNMP?
[1694]
Last Modified:
Jan 7, 2013 3:17 PM
What is SNMP? SNMP stands for Simple Network Management Protocol. SNMP allows SNMP-capable devices on a network to be monitored and configured remotely. SNMP also allows these devices to report events through the use of SNMP traps. For more
|
|
|
E-2D: Why are my combination temperature/humidity sensors reading different humidity values?
[1693]
Last Modified:
Feb 8, 2024 5:49 PM
E-2D: Why are my combination temperature/humidity sensors reading different humidity values? If you have two or more sensors reading different humidity values, the most likely cause is that the temperature values are different for each sensor.
|
|
|
E-2D: Can the E-2D ping traffic on a 10.x.x.x network and send emails to 153.x.x.x mail relay server?
[1692]
Last Modified:
Feb 7, 2018 10:17 AM
E-2D: Can the E-2D ping traffic on a 10.x.x.x network and send emails to 153.x.x.x mail relay server? Yes. If the E-2D is on the 10.x.x.x network, it can ping any device on the network and send emails to the 153.x.x.x mail server relay. A
|
|
|
E-2D: Can I adapt communications between the E-2D and a Gigabit network switch?
[1691]
Last Modified:
Feb 7, 2018 10:17 AM
E-2D: Can I adapt communications between the E-2D and a Gigabit network switch? Yes. Most Gigabit switches are 10/100/1000 compatible. When you connect the E-2D to a Gigabit network, the network will configure that port to 100 Mbit speeds.
|
|
|
E-2D: How do I configure the E-2D Web Interface to support HTTPS/Port 443?
[1690]
Last Modified:
Feb 7, 2018 10:18 AM
E-2D: How do I configure the E-2D Web Interface to support HTTPS/Port 443? The E-2D is already configured to support HTTPS/Port 443. To connect to the E-2D using HTTPS/Port 443, change the URL of the browser to HTTPS E.g.:
|
|
|
E-2D: How to Set Up Alerts and Different Contact Settings for Specific Times of the Day/Week
[1926]
Last Modified:
Feb 7, 2018 10:18 AM
E-2D: How to Set Up Alerts and Different Contact Settings for Specific Times of the Day/Week Setting Up Alerts for Specific Times of the Day/Week Have a user only receive alerts during specific times and days of the week. Access the
|
|