Welcome

VOPEX-M12V-x: Video picture is not sharp or is smeared.

Issue: Video picture is not sharp or is smeared.

Cause: All video cables are not firmly seated.

Solution: Check all connections. Ensure all cables are fully seated.

OR

Cause: CAT5 cable is too long.

Solution: Verify length is within specified limits of 600 feet.

OR

Cause: CAT5 cable is not properly connected.

Solution: Check cable connections. Ensure they are properly and completely snapped-in.

OR

Cause: A cabling change has been made while the system was powered.

Solution: Manually adjust the video by pressing the “+” button if the image is not crisp and clear enough, and the “-” button if the image has been over-corrected such that horizontal lines appear to trail or shadow at the edge of an open window.

OR

Cause: A new receiver was connected while the system was powered.

Solution: Manually adjust the video by pressing the “+” button if the image is not crisp and clear enough, and the “-” button if the image has been over-corrected such that horizontal lines appear to trail or shadow at the edge of an open window.

OR

Cause: Video was not manually adjusted.

Solution: Adjust video at the receiver by pressing the “+” button if the image is not crisp and clear enough, and the “-” button if the image has been over-corrected such that horizontal lines appear to trail or shadow at the edge of an open window.