Category:
Troubleshooting
Sub-Categories:
0,
Documents:
6,
Last Update:
Jan 18, 2013 2:30 PM
|
VOPEX-M12V-x: Video picture is not sharp or is smeared.
[1772]
Last Modified:
Jan 18, 2013 2:30 PM
VOPEX-M12V-x: Video picture is not sharp or is smeared. Issue: Video picture is not sharp or is smeared. Cause: All video cables are not firmly seated. Solution: Check all connections. Ensure all cables are fully seated. OR Cause:
|
|
|
|
VOPEX-M12V-x: A constant vertical wobble appears down the screen
[1771]
Last Modified:
Jan 18, 2013 2:29 PM
VOPEX-M12V-x: A constant vertical wobble appears down the screen Issue: A constant vertical wobble appears down the screen. Cause: CAT5 cable is too close to a strong power source. Solution: Reroute CAT5 cable if possible. OR
|
|
|
|
VOPEX-M12V-x: Monitor sometimes loses sync, causing it to go blank for a second or two
[1770]
Last Modified:
Jan 18, 2013 2:28 PM
VOPEX-M12V-x: Monitor sometimes loses sync, causing it to go blank for a second or two Issue: Monitor sometimes loses sync, causing it to go blank for a second or two. Cause: The CAT5 cable is not properly connected. Solution: Check
|
|
|
|
VOPEX-M12V-x: The picture on the monitor is black and white, rather than color
[1769]
Last Modified:
Jan 18, 2013 2:28 PM
VOPEX-M12V-x: The picture on the monitor is black and white, rather than color Issue: The picture on the monitor is black and white, rather than color. Cause: The video cable was not attached to the CPU when it was booted. Solution:
|
|
|
|
VOPEX-M12V-x: No video on monitor/display
[1768]
Last Modified:
Jan 18, 2013 2:27 PM
VOPEX-M12V-x: No video on monitor/display Issue: No video on monitor/display. Cause: One or more video cables is loose or disconnected. Solution: Check all video cable connections. OR Cause: No power to the VOPEX or the
|
|
|
|
VOPEX-M12V-x: Power LED does not illuminate
[1767]
Last Modified:
Jan 18, 2013 2:26 PM
VOPEX-M12V-x: Power LED does not illuminate Issue: Power LED does not illuminate. Cause: Power supply is not connected or plugged-in. Solution: Ensure that each outlet is live and that the AC adapters are plugged-in (one for each remote
|
|
|
|
|
