VOPEX-M12V-x: Video picture is not sharp or is smeared. Issue: Video picture is not sharp or is smeared. Cause: All video cables are not firmly seated. Solution: Check all connections. Ensure all cables are fully seated. OR Cause: CAT5 cable is too long. Solution: Verify length is within specified limits of 600 feet. OR Cause: CAT5 cable is not properly connected. Solution: Check cable connections. Ensure they are properly and completely snapped-in. OR Cause: A cabling change has been made while the system was powered. Solution: Manually adjust the video by pressing the “+” button if the image is not crisp and clear enough, and the “-” button if the image has been over-corrected such that horizontal lines appear to trail or shadow at the edge of an open window.
OR Cause: A new receiver was connected while the system was powered. Solution: Manually adjust the video by pressing the “+” button if the image is not crisp and clear enough, and the “-” button if the image has been over-corrected such that horizontal lines appear to trail or shadow at the edge of an open window. OR Cause: Video was not manually adjusted.
Solution: Adjust video at the receiver by pressing the “+” button if the image is not crisp and clear enough, and the “-” button if the image has been over-corrected such that horizontal lines appear to trail or shadow at the edge of an open window.
|