Category:
Troubleshooting
Sub-Categories:
0,
Documents:
20,
Last Update:
Dec 7, 2012 1:44 PM
Documents in Category
|
|
Go to Page: [Previous | 1 2 ]
|
|
ST-C5KVM-600: The image on the monitor is black and white, rather than in color.
[1626]
Last Modified:
Dec 7, 2012 1:13 PM
ST-C5KVM-600: The image on the monitor is black and white, rather than in color. Issue: The image on the monitor is black and white, rather than in color. Cause: The video cable was not attached to the CPU when it was booted. Solution:
|
|
|
ST-C5KVM-600: Video Picture is not sharp or is smeared.
[1625]
Last Modified:
Dec 7, 2012 1:12 PM
ST-C5KVM-600: Video Picture is not sharp or is smeared. Issue: Video Picture is not sharp or is smeared. Cause: CATx cable is too long. Solution: Verify length is within specified limits of 600 feet. OR Cause: Video not
|
|
|
ST-C5KVM-600: No video on monitor.
[1624]
Last Modified:
Dec 7, 2012 1:10 PM
ST-C5KVM-600 : No video on monitor. Issue: No video on monitor. Cause: One or more video cables is loose or disconnected. Solution: Check all video cable connections. OR Cause: No power to Remote or Local Units.
|
|
|
ST-2C5KVM-600: Local power LED does not illuminate when the CPU is powered.
[1623]
Last Modified:
Dec 7, 2012 1:10 PM
ST-2C5KVM-600: Local power LED does not illuminate when the CPU is powered. Issue: Local power LED does not illuminate when the CPU is powered. Cause: The pigtail's keyboard connector is not properly plugged in to the PC.
|
|
|
ST-C5KVM-600: Remote or Local Unit power LED does not illuminate.
[1622]
Last Modified:
Dec 7, 2012 1:10 PM
ST-C5KVM-600: Remote or Local Unit power LED does not illuminate. Issue: Remote or Local Unit power LED does not illuminate. Cause: Power supply is not connected or plugged-in. Solution: Make sure outlet is live and AC adapter is
|
|
|
|