|
E-MINI: How many sensors can the E-MINI use?
[31]
Last Modified:
Feb 7, 2018 10:56 AM
How many sensors can the E-MINI use? The E-MINI can support up to 7 sensors at a time; 2 cat5 sensors, 4 dry contact sensors, and 1 water sensor. The temperature/humidity combination sensors act as 2 sensors in one, in effect allowing up to 9
|
|
|
|
E-MINI: What types of sensors can the E-MINI use?
[32]
Last Modified:
Feb 7, 2018 10:56 AM
What types of sensors can the E-MINI use? The E-MINI can use combinations of temperature, humidity, door contact, panic button, and tamper switch sensors. It will also operate with any other Dry Contact sensor within specifications.
|
|
|
|
E-MINI: Can the E-MINI send SMS text messages?
[33]
Last Modified:
Feb 7, 2018 10:56 AM
Can the E-MINI send SMS text messages? The E-MINI currently cannot send SMS text messages directly, however, there are third party programs available that will send SMS text messages upon receipt of an SNMP trap or Syslog message from the E-MINI.
|
|
|
|
E-MINI: Can the E-MINI trigger an external device, such as an alarm system?
[34]
Last Modified:
Feb 7, 2018 10:57 AM
Can the E-MINI trigger an external device, such as an alarm system? The sensor ports on the E-MINI are only for receiving signals from an external device and cannot be used for sending signals. However, the E-REMS is capable of triggering an
|
|
|
|
E-MINI: How many users can be logged in simultaneously?
[35]
Last Modified:
Feb 7, 2018 10:57 AM
How many users can be logged in simultaneously? Up to 4 unique users may be logged into the E-MINI at one time.
|
|
|
|
E-MINI: Do I have to use a public SNMP community?
[36]
Last Modified:
Feb 7, 2018 10:57 AM
Do I have to use a public SNMP community? Another SNMP community can be used by specifying the community's name on the Administration | Network page under 'SNMP Community'.
|
|
|
|
What is a TIMEP server?
[37]
Last Modified:
Feb 6, 2009 2:11 PM
What is a TIMEP server? TIMEP stands for Time Protocol. A TIMEP server is dedicated to maintaining and providing the current time to devices requesting it. A device, like the ENVIROMUX-MINI, sends a TIMEP message to a TIMEP server to periodically
|
|
|
|
What is SNMP?
[38]
Last Modified:
Feb 6, 2009 1:56 PM
What is SNMP? SNMP stands for Simple Network Management Protocol. SNMP allows SNMP-capable devices on a network to be monitored and configured remotely. SNMP also allows for these devices to report events through the use of SNMP traps. For more
|
|
|
|
What is the difference between SNMP and Syslog?
[39]
Last Modified:
Feb 6, 2009 2:12 PM
What is the difference between SNMP and Syslog?SNMP stands for Simple Network Management Protocol and allows for remote monitoring and configuration of SNMP-capable devices on a network, while Syslog is a different protocol that can be used for
|
|
|
|
How do I Calculate the BTU Output (Heat Load) of NTI Products?
[82]
Last Modified:
Feb 6, 2009 3:27 PM
How do I Calculate the BTU Output (Heat Load) of NTI Products? To determine the BTU output: 1. Determine the voltage and amp rating of the power supply of the product. This information can usually be obtained from the product documentation or on
|
|
|
|
Why do I get syntax errors while using MIB files with SNMP command line applications like ?snmptranslate? ?
[101]
Last Modified:
Feb 6, 2009 2:43 PM
Why do I get syntax errors while using MIB files with SNMP command line applications like ?snmptranslate? ? Using certain SNMP command line applications (including ?snmptranslate? ?snmpwalk? etc.) with MIB files that contain underscores/underlines
|
|
|
|
Can the ENVIROMUX Server Environment Monitoring System retransmit an alert at specific intervals defined by the user?
[102]
Last Modified:
Feb 7, 2018 10:57 AM
Can the ENVIROMUX Server Environment Monitoring System retransmit an alert at specific intervals defined by the user? Yes, the ENVIROMUX Server Environment Monitoring System can be set to retransmit an alert until it is acknowledged, at specific
|
|
|
|
E-MINI: What are sensor extension cables used for?
[126]
Last Modified:
Feb 7, 2018 10:52 AM
What are sensor extension cables used for? Sensor extension cables may be used to extend the reach of dry contact sensors up to 100 feet.
|
|
|
|
E-MINI: How many liquid detection sensors can be connected to the E--MINI? What is the maximum cable distance?
[128]
Last Modified:
Feb 7, 2018 10:51 AM
How many liquid detection sensors can be connected to the E--MINI? What is the maximum cable distance supported from the E-MINI to the liquid detection sensor? Up to five (5) liquid detection sensors can be connected to the E-MINI Server
|
|
|
|
E-MINI: How can I tell if my smoke detection sensor is working?
[132]
Last Modified:
Feb 7, 2018 10:52 AM
How can I tell if my smoke detection sensor is working? You can test the smoke detection sensor using any strong magnet such as a used hard drive magnet or a door contact switch magnet. To do so: Power the sensor on. The sensor's LEDs flash
|
|
